ION Audio Projector Max HD Full HD Portable Projector and Bluetooth Speaker - Manual (Page 14)

14
Projecting Video from a Device Connected to the HDMI Port
To play video from a device connected to the HDMI Port (such as a DVD player or
computer):
1. Use an HDMI cable to connect your device to the HDMI Port on Projector Max ™ HD.
2. Make sure that HDMI is selected as the projector source (as described in Selecting the
Projector Source ).
3. Once you select HDMI as the projector source, the projector will display whatever is
playing on the device connected to the
HDMI Port . Use the controls on your device in
order to adjust playback as needed.
Note: Using the power adapter will provide a slightly brighter picture and louder audio.
IMPORTANT NOTE: If no sound is heard from Projector Max ™ HD's speaker when playing
video from a device connected to the HDMI Port, check the source's audio settings and
make sure they are set to
PCM Stereo mode. Alternatively, connect the device's audio to
Projector Max ™ HD via Bluetooth while playing video via HDMI.
Listening to Music from a Bluetooth Device
When Projector Max ™ HD is paired with a Bluetooth device (such as a smartphone), it can play
music from the device through its speaker. You can play music from the Bluetooth device
while the projector is on and operating or while the projector is off.
To pair with a Bluetooth device:
1. Turn on your Bluetooth device and power on Projector Max ™ HD, which will automatically
begin the pairing process (Projector Max ™ HD is always in pairing mode). You will know
that Projector Max ™ HD is not yet paired to a Bluetooth device if the Bluetooth LED is
blinking.
2. Navigate to the Bluetooth device’s setup screen. Then find and select Projector Max HD .
You will know that Projector Max ™ HD is paired with your Bluetooth device when the
Bluetooth LED is lit solid blue. Also, the speaker will play a brief tone once pairing is
complete.
Note: If your Bluetooth device prompts for a pairing code, enter “ 0000 ”.
Note: If you have previously paired to the Bluetooth device, you may be able to skip Step
2 and simply wait for it to connect with Projector Max ™ HD after powering on.
To disconnect the paired Bluetooth device,
press and hold the Bluetooth button .
To pair with a different Bluetooth device,
repeat step 2 after disconnecting from the first
device. During the pairing process, it may help to move the first device out of range or to
disable its Bluetooth capacity.
Note: Maximum range will be achieved when using devices with Bluetooth 5.0.
Note: Users should consider updating their Bluetooth device’s operating system if
experiencing trouble with pairing or playing music.