iOttie Velox Magnetic Wireless Charging Dash and Windshield Mount - Manual (Page 6)

11 10 EN
Additional Information
To reuse the suction cup,
simply rinse under warm
water and let air dry to
restore tacky suction.
Option B
Windshield Installation
Choose a location on the windshield and wipe
any dust or debris from the surface.
Connecting to Power
Connect the attached
USB-C cable to the
included 12V adapter
and plug the adapter
into your vehicle’s
auxiliary power outlet.
Mounting Your Phone
Simply tap your phone against the mount and
the magnets will hold it in place. Charging will
begin automatically. You are now ready to start
driving.
*The Velox Dash Mount does not have an on/off switch.
Once the cable is plugged in and the vehicle is turned
on, the mount will stay on.
* The dashboard pad is not recommended for windshield
mounting.
*Telescopic arm extends from 4 inches to 6 inches.
6 " 5 "
4 "
1. Peel off the protective
film on the suction cup
and press firmly onto
the windshield.
2. Push down the locking
lever to engage
suction.