EnGenius Technologies EOA7530 - Manual (Page 49)

Chapter 6 LAN Setup
This chapter describes the EOA7530 Local Area Network (LAN) settings.
6.1 LAN Settings
Note: Changing LAN IP address changes the LAN Interface IP address. When you click Apply, the Web
Configurator automatically redirects you to the new IP address .
LAN IP
IP Address Specify the IP address of the EOA7530 LAN port.
IP Subnet Mask Specify the subnet mask of the EOA7530 LAN port.
Default Gateway Specify the default gateway of the EOA7530 LAN port.
802.1d Spanning Tree Enable or disable Spanning Tree.
DHCP Server
DHCP Server Enable or disable the DHCP server to allow automatic allocation of IP addresses to
LAN client PCs. If you disable DHCP Server, you must configure your PC’s local IP
address to access the Web Configurator.
Lease Time Specify the amount of time a DHCP network user is allowed connection to the
EOA7530 with their current dynamic IP address.
Start IP Specify the starting IP address range for the pool of allocated for private IP
addresses. The starting IP address must be on the same subnet as the ending IP
48