Epson PERFECTION V700 PHOTO User Manual
Page 8
Epson Perfection V700 Photo/V750 Pro
8 - Epson Perfection V700 Photo/V750 Pro
12/05
Placing Film in the Film Area Guide
You can scan film that cannot be placed in the film holders (up
to 8 × 10 inch film) using the film area guide in Professional
Mode. When scanning film using the film area guide, always
select
Film (with Film Area Guide)
as the Document Type.
Note: You cannot use DIGITAL ICE Technology when scanning film
with the film area guide. When scanning using the film area guide,
striped (newton) rings may appear in your scanned images.
1. Make sure the tab on the long edge of the film area guide is
on the left side.
2. Fold the tab along the perforated lines as shown.
3. Place the film area guide on the document table with the tab
facing the left side of the scanner.
4. Place the film in the film area guide (up to 8 × 10 inch film)
with the shiny base side facing down. Your images and any
wording on the film should appear backwards on the side
that faces up. Make sure the entire image frame is
positioned in the film area guide opening.
Note: Leave the part of the film area guide shown below
uncovered or colors in your scans will be affected.
5. Make sure you removed the document mat. See “Removing
6. Close the scanner cover.
Note: You cannot use Full Auto Mode or Home Mode when scanning
film with the film area guide.
When you are finished scanning film, be sure to replace the
document mat before scanning documents or photos. See
“Replacing the Document Mat” on page 9.