Eiki EIP-1 - Manual (Page 8)

7
2) For playing video with audio effects
Connecting with the Video Enhanced Adaptor; and choose terminals below to
connect.
1. Power cord
2. VGA signal in port
3. USB mouse control
4. S-Video signal in port
5.6 Composite Video signal in port
7.8 PC Audio In/Out port
Notes
1. Please make sure that both projector and computer are
shutdown.
2. Plug USB cable into computer.
3. Plug one end of the VGA cable into the projector.;
4. Plug the other end into the computer.
5. Plug the power cord into the power connector on the side
of projector; and plug into the socket.
6. Turn on projector first, then computer.
Connecting to a Computer