HP 630 series - Manual (Page 16)

16 hp photosmart 630 series user’s manual
Installing a memory card (optional)
Your digital camera contains 16 MB of internal memory that
allows you to store images and video clips in your camera.
However, you can use an optional memory card (purchased
separately) instead to store images and video clips. For
information on the memory cards that are supported with your
camera, see Purchasing camera accessories on page 110.
NOTE If a memory card is installed in the camera, all new
images and video clips will be stored only on the memory
card. The internal memory and its file system are not
available when a memory card is installed in the camera.
1 With the battery/memory card
door open on the bottom of the
camera, insert the memory card
in the slot behind the batteries as
shown. Make sure the memory
card snaps into place.
2 Close the battery/memory
card door.
To remove a memory card, press down on the top edge of the
memory card, and it will spring outward from the slot.
NOTE You can install or remove an optional memory card
while the camera is powered on with an optional HP AC
power adapter.