Setting the flash, Red eye, Using the shooting modes – HP R830/R840 User Manual

Page 17: Using panorama mode, Setting the, Setting options for taking pictures and, Using the, Using

Advertising
background image

3

Setting options for taking

pictures and recording video

clips

Your camera's default settings work well for most shooting situations. For some
situations, however, the features described in this chapter can improve the pictures you
take and the video clips you record. In addition to setting features that optimize the camera
for lighting and motion, you can also set the camera to create a panorama, to take a series
of pictures rapidly or take images 10 seconds after you press the Shutter button, giving
you time to place yourself in the image.

Setting the flash

To select a flash setting, press while in

Picture Capture, use

to highlight the

desired flash mode, then press

. To exit without changing the flash setting,

press .

Auto Flash (Default)—The camera uses the flash, if necessary. The flash may cause a
phenomenon called red-eye (see

“Red eye” on page 15

).

Flash On—The camera always uses flash. If the light is behind your subject, use this
setting to increase the light on the front of your subject. The flash may cause a
phenomenon called red-eye (see

“Red eye” on page 15

).

Flash Off—The camera does not use flash. Use this setting to capture poorly lit subjects
beyond the flash range or to capture scenes with the existing light.

The flash setting remains in effect until it is changed again, or you turn off the camera.

NOTE:

The flash is set to Flash Off in

Landscape,

/ Panorama,

Sunset, and

Theatre shooting modes, with the

Burst setting, and while

recording video clips. The flash is set to Flash On in

Night Portrait shooting

mode.

Red eye

The red-eye phenomenon is caused when light from the flash reflects off the subjects'
eyes, which can make human eyes appear red and animal's eyes appear to glow in the
captured image. You can remove the red eyes in human subjects after you have captured
the image, using either

Remove Red Eyes (see Remove Red Eyes under

“Using

the Design Gallery Menu” on page 27

) or the HP Photosmart Software that came with

your camera. You can remove the glowing eyes in animal subjects after you have
captured the image using Pet-Eye Fix (see

“Enhancing photos” on page 28

).

Using the shooting modes

Shooting modes are predefined settings for everyday situations. They are optimized for
particular types of scenes or shooting situations.

Setting options for taking pictures and recording video clips

15

Advertising