Harbor Freight Tools Pittsburgh Automotive Portable Tire Changer 69686 - Manual (Page 3)

Page 3 For technical questions, please call 1-800-444-3353. SKU 69686
assembly/mounting
instructions
Read the EntiRE impORtant
SaFEty inFORmatiOn
section at the beginning of this
document including all text
under subheadings therein
before set up or use of
this product.
1. The Tire Changer will require
some assembly after unpacking.
See the assembly components
in Figure 1, below.
Center
Post (1)
Side
Bases (9)
Post
Base (13)
Mount/
Demount
Bar (14)
Hex
Bolts (6),
Washers
(11) and
Nuts (12)
Bead
Breaker
Handle
(7)
Clevis
Pins (5)
Bead Breaker
Shoe (10) R-Clips
(8)
Figure 1
nOtE: Assembly of the Base
units (9, 13) to the Center Post (1) will
be easier if done on a worktable.
2. Set the bottom of the Center Post
diagonally across the middle of the
Post Base. See Figure 2, below
nOtE: Make sure to align the Center
Post with the Post Base so that the
Center Post’s bracket faces the
longer end of the Post Base.
3. Fasten Center Post and Post
Base together using the Hex Bolts
(6), Washers (11), and Nuts (12).
See Figure 2, below.
Figure 2
Center
Post (1) Post
Base (13)
Hex Bolts (6),
Washers (11)
and Nuts (12)