Harman-Kardon HD 990 - Manual (Page 5)

5
HD 990
Front Panel Controls
1 Main Information Display: this display delivers messages and status indications
to help you operate the cd player.
2 Power On/Off (Standby): press the button once to turn the cd player on, press
it again to put the unit in the standby mode.
3 Open/Close: press this button to open or close the disc tray.
4 Play: press to initiate playback or to resume playback after pause has been
pressed.
5 Pause: press this button to momentarily pause playback. to resume playback,
press the button again. If a cd is playing, the sound will be muted.
6 Stop: press this button to stop the disc currently being played or to exit program
mode (see page 11 for complete information).
7 Skip/Search (Previous): press this button to move backward through the music
tracks on a cd disc. Keep the button pressed to search backward at one of the
available speeds.
8 Skip/Search (Next): press to move forward through the music tracks on a cd.
Keep the button pressed to search forward at one of the available speeds.
9 Display Dimmer: press this button to reduce the brightness of the Information
display by 50% or to turn the display off completely in the following order: full
BrIghtness  half BrIghtness  off  full BrIghtness.
Important Note: When the unit is turned off (to standby), pressing the play button
4 j on the front or on the remote will automatically turn on the player and start
playback.
1 main Information display
2 power on/off (standby) and status mode Indicator
3 open/close
4 play
5 pause
6 stop
7 skip/search (previous)
8 skip/search (next)
9 display dimmer