Hitachi Koki USA DDC 52N - Manual (Page 36)

2-18
Cha
p
te
r 2
G
et
ti
n
g
to
Kn
ow
Y
o
ur
C
opi
er
6. Turning ON and OFF and Initial Mode
Turning ON and OFF
When the Copier is Turned ON
When the Power Switch is turned ON, the Start Key lights up orange.
In about a few seconds, the message “Now warming-up. Ready to scan.” appears and the Start key lights
up green. The copier thereafter enables its auto copy start function. ☞p. 2-19
At this time, however, pressing of the Start key does not start a copy cycle. The copier needs a warm-up
period of about 7 minutes (at a room temperature of 23°C).
Initial Mode
When the Power Switch is turned ON, the Basic screen appears on the Touch Panel. The settings on this
screen are called the initial mode, serving as the reference for all panel settings to be later made.
Useful Tip
User’s Choice can be used to change the settings of initial mode. ☞p. 4-14
• Turning the Copier ON:
Press the Power Switch to the (ON) position.
• Turning the Copier OFF:
Press the Power Switch to the (OFF) position.
NOTE
The Auto Power OFF function will automatically
shut down the copier a given period of time after
the last activity. ☞p. 2-19
1154O021AA
No. of copies selected : 1
Finishing :
Non-Sort
Zoom :
×
1.000
Paper : Auto Paper
Density : Auto
Orig. Copy : 1 2 ▼ ▼
Touch this key if you want to make
1
1 copies. ▼
1155O228CB