Hoshizaki KMS-1400MLH - Manual (Page 14)

1
CAUTION
The bin control lead is routed through the back of the icemaker. If care is not
taken when removing the tank, the lead could be severed.
6) Pull out the tank only as far as shown in 6.
7) Remove the cube guide, then remove the
bin control.
8) Being careful not to pull the bin control
lead, remove the tank completely from the
icemaker.
9) Remove the remaining pieces of tape
from the tank and leave the tank out of the
machine for now.

Tank Drain Hose
4) Disconnect the float connection hose from the plastic pipe.
5) Disconnect the tank drain hose from the tank. Although the tank can be removed at this
point, do not remove it yet because the bin control is taped to the tank.

Pump
Suction
Hose

Drain
Pipe
2) Disconnect the pump suction hose from the plastic pipe.
3) Disconnect the drain pipe from the plastic pipe.

Bin Control
Lead

Float Connection Hose