Freecom Technologies IEEE 1394 - Manual (Page 6)

6
FREECOM Cable II USB / Cable II IEEE 1394
GB
1
C
HAPTER
1:
Initial operation - hardware installation for PC & Mac
1. Connect the drive connector of the FREECOM Cable II USB / Cable II IEEE1394
to the FREECOM device.
2. Connect the power connection to the FREECOM drive.
3. Then insert the power adapter of the FREECOM device into a power socket.
4. Connect the USB/IEEE 1394 (FireWire or i.LINK) connection (depens on version)
of the Cable II to your computer.
sample:
5. You can now begin software installation.
C
HAPTER
2:
Driver installation for PC
Users with operating systems Windows 98 SE or Windows ME please continue with
chapter 2.1. Users with operating systems Windows 2000 please continue with
chapter 2.4.
2.1 Installation under Windows 98 SE / Windows ME (USB)
1. The driver database is loaded automatically after you have connected the
Cable II USB to the PC.
Note: If you are connecting a USB device to your computer for the first
time, you might be promted to first install the special Windows 98 drivers
for USB from the Windows 98 CD.
2. Now insert the FREECOM installation disk/CD "Software for Cable II USB" for
Windows 98/ME in the floppy drive of your computer.
Connection
to PC/Mac
FREECOM Cable II USB/
Cable II IEEE 1394
Drive connector