FUJITSU TX300 - Manual (Page 56)

56 Options Guide TX300 S6
Accessible 5.25-inch drive Accessible drives and LSD/LSP
7.2 Accessible 5.25-inch drive
Ê Open the server and remove the the front cover or the rack front cover as
described in the
chapter "Preparation" on page 27 .
I
New 5.25-inch drives are supplied without EasyClick rails. Before
installing a new 5.25-inch drive you must therefore remove the EasyClick
rails from the dummy cover and mount the EasyClick rails on the new
5.25-inch drive.
7.2.1 Removing the dummy cover
Figure 26: Removing the dummy cover
Ê Press the metal tongues on the sides of the EasyClick rails inward (1) until
the locking mechanism disengages.
Ê Pull the dummy cover out of the bay frontward (2).
ቢ
ቢ
ባ