FOCUS Enhancements FOCUS FireStore FS-4 Pro - Manual (Page 50)

Using the FS-4 HD with a Computer
34 FS-4 HD and FS-4Pro HD Portable DTE Recorders
Initial Setup
1.
Connect the FS-4 HD through its
COMPUTER I/O
1394 port to the
computer system using a standard 6-pin to 6-pin FireWire cable.
2.
Enter HDD mode and enable DD Drive.
This step is required before mounting the FS-4 HD to a computer.
• On the FS-4 HD go to the
HDD
screen.
• Select
DD Drive
and
Right
arrow to
Connect
screen.
• Press
Enable
function button.
Refer to the section,
HDD Mode Screen
on page 57
3.
Connect power to the drive if necessary.
4.
Consult the computer’s documentation for more information.
Mounting the FS-4 HD in Windows
Use this procedure for Windows XP, 2000, 98SE and ME.
1.
On a Windows-based computer system, double click the
My
Computer
icon on the top left hand corner of the desktop. A
directory window appears.
2.
Locate the FS-4 HD drive and open it.
Often, it appears as a standard FireWire disk drive and may be
labeled E:, F:, G:, and so on.
3.
Open the FS-4 HD disk icon.