6 operation flow of entire application, 1 mp3, Operation flow of entire application – FUJITSU FMB AN706 User Manual
Page 66
AN706-00040-2v0-E
65
7.2.6 Operation Flow of Entire Application
7.2.6.1 MP3
(1) The application operation flow with audio data playback stopped is as follows.
① USB MSC device connection/disconnection judgment is executed in the main
loop.
② If a USB memory is connected, after reading the JPEG files from the USB
memory and displaying the images for selection, switch pressing detection and
touch panel detection are conducted.
③ If the play/stop switch is detected to be pressed down, or if not detected, but an
area of the touch panel is detected to have been touched, the JPEG files
corresponding to the selected MP3 file are read from the USB memory and
displayed for playback. If the selection previous switch or selection next switch
are detected to have been pressed down, MP3 file selection is shifted and LED
control is executed.
④ The MP3 selected from the USB memory is then opened.
⑤ The MP3 file header is read, MP3 file header analysis processing is conducted
and operation shifts to audio data playback in progress status.
This operation is shown in Figure 48.