Graco Jumpster 8740 - Manual (Page 4)

5
551-10-96 IS8722
Attaching the Seat
Step 1.
With the printed side of the
seat facing up, fold over the
top edge of the seat as
shown. Position seat as
illustrated, and lower it into
the opening in the jumper.
The leg openings of the seat
will face toward the front of
the jumper tray.
Step 2.
Tuck edges of jumper seat
into the channel in the tray.
Step 4.
Turn tray over and push seat
down into place.
Test seat assembly by
pushing down hard on seat.
The grommets should remain
secure on the pegs.
8 6 7
Hanging the Jumper
Step 1.
Check the door molding. It
must be at least ½" flat on
top, and securely fastened to
the wall. The wall must be at
least 3" and no more than
6½" thick.
Step 2.
Put clamp over door frame.
Check that clamp is secure
on door frame by pulling
firmly down on the clamp
cover. If molding moves,
repair it before using the
jumper.
Adjusting the Jumper
Place your child in the
jumper. Hold main strap
below slide buckle with one
hand. Adjust the slide buckle
with other hand as shown, so
that only the front of your
baby's foot touches the
floor.
IF JUMPER IS TOO
CLOSE TO THE FLOOR:
Step 1.
If main strap is too long, first
remove baby from the
jumper. Then pull on small
loop as shown until the sewn
end of the loop passes
through the slot in the adjust-
ment buckle. Extra force may
be needed to get sewn end
through slot.
Step 2.
Continue to pull out the small
loop as shown until the strap
is proper length.
Removing the Seat
To remove the seat for washing, first turn jumper
tray upside down. At all 7 slots, pull the grommets
off of the pegs and push them down.
When all 7 slots have the grommets pushed into
them, turn the jumper over and remove the seat.
Wall
thickness
3 " to 6 ½"
½" minimum flat
surface at top
of molding
Molding
Printed side UP
Return the form below with payment to:
GRACO CHILDREN’S PRODUCTS INC.
CUSTOMER SERVICE DEPARTMENT
MAIN STREET
ELVERSON, PA 19520
IF YOU NEED HELP
If you have any questions, please call toll-free:
1-800-345-4109
Hours 8 a.m.—10 p.m. Eastern time.
Parts List:
Seat
Tray
Clamp with straps
Price:*
$10.00
$10.00
$12.00
* Prices subject to change without notice.
Step 3.
Turn tray upside down. Pull the grommets part way
through the slots, and hook them onto the pegs as
shown below.
Be sure all 7 grommets are hooked onto the
pegs.
Clamp cover
Replacement Parts
Instructions for ordering jumper parts:
Complete form below. Your jumper model number
MUST be included on the form to ensure proper
replacement parts. Your model number can be
found on a sticker beneath the jumper tray. Payment
must accompany your order.
IF YOU HAVE A PROBLEM,
DO NOT RETURN PRODUCT
TO THE STORE,
CALL US IMMEDIATELY AT
1-800-345-4109.
Model Number
________________
(Must be filled in)
Seat
Tray
Clamp with straps
SHIP TO:
_______________________
Name
_______________________
Address
_______________________
City, State, Zip
(____)__________________
Telephone
Check enclosed
(payable to Graco Children’s Products Inc.)
Charge to credit card:
Visa
MasterCard
Discover
Account #:______________________________
Expiration date:_________________________
Signature:______________________________
Total:______________
6% sales tax
(PA only):__________
Total amount
due:______________