GE Monogram ZFSB27DYSS User Manual

Zfsb27dyss—27 cu. ft. stainless steel refrigerator, Monogram

Advertising
background image

Monogram.

UL

R

Listed by
Underwriters
Laboratories

For answers to your GE Monogram,

GE Profile,

GE, Hotpoint and RCA appliance questions, call
GE Answer Center

®

service, 800.626.2000.

Rvised 7/97

ZFSB27DYSS—27 cu. ft. Stainless Steel Refrigerator

Dimensions and Specifications (in inches)

Water Connection Location

Clearances: This Monogram free-standing refrigerator requires
the following clearances for proper air circulation, plumbing and
electrical connections.

Sides . . . . . . .5/8"
Top . . . . . . . . . .1"
Back . . . . . . . . .1"

If the refrigerator is to be installed in a corner:
• A 1-1/2" clearance between the case trim and the adjacent wall

on both sides of the refrigerator will assure a 90° door opening
and access to all drawers.

• Allow 11-1/4" clearance on the freezer side for removal of ice bin.
• On the fresh food side, drawers can be removed by first disassembling

door bins. Or, allow 14" clearance to remove drawer without
disassembling the door bins.

Additional Specifications: The water line can be routed through the
floor or through an adjacent cabinet, as close to the back wall as possible.

A 115 volt, 60 Hz. 15 or 20 amp power supply is required. An individual
properly grounded branch circuit or circuit breaker is recommended, as
noted on the rating plate. The rating plate is located on the bottom of
the cabinet front of the fresh food compartment and is visible when the
door is opened.

Installation Information:
Before installing, consult installation instructions (Pub. No. 49-6894)
packed with product for current dimensional data.

36"

71"

35"

Including

Handles

32-1/2"

Case

Depth

Through floor to

basement cold
water pipe

Under sink to cold water pipe

Through wall to utility room

cold water pipe

In crawl space

under house

Advertising