Grandstream Networks Security Camera - Manual (Page 7)

Firmware 1.0.0.11 Page 7 of 11
Grandstream Networks, Inc. 08/2009
Configuration
After installing GS_NVR, it must be configured for your network cameras or digital video servers. This
section describes how to configure GS_NVR, as well as how to set up auto recording.
Add network cameras/digital video servers
Add network cameras/digital video servers – using GS_Search
1. From GS_NVR, click Search to open GS_Search dialog.
2. In GS_Search window, click Search.
3. Network cameras or digital video servers found on your local subnet will be listed.
4. Select the device you want to add to GS_NVR and click Add.
Add network cameras/digital video servers – manually
1. From GS_NVR, click Add a Device to open the Add a Device dialog.
2. Enter the required information.
Device Name – Enter a name for the device.
Host Address– Enter the IP address or domain name of the device.
Channel – Select the channel from which you would like to record the video streams. For
example, you might want to record the video from channel 3 of a GXV3504.
GS_NVR – Add a device