Gateway kas103 User Manual
Page 4
4
Figure 2
Keyed slot
on satellite
Screw firmly
mounted
Wall
1
/
8
˝
same height as the two surround speakers,
but centered on the wall between them. It
may take some experimentation with different
locations for the surround speakers to suit
your preference and your room. The center
channel speaker should be placed as close to
the TV as possible, preferably directly above
or below the set.
Each satellite is supplied with a mounting
bracket to allow hanging the speaker system
on the wall. All that is needed is a good solid
mount in the wall (into a wood stud if
possible) to securely hold the weight of
the speaker. Leave approximately
1
/
8
˝ of a
screw head exposed from the wall and the
keyhole slot in the mounting bracket will
slide down over the head of the screw to
hang the speaker on the wall (Figure 2).
See Figure 3. The metal bracket supplied on the
rear of each satellite can be removed and an
aftermarket swivel-type satellite mount can be
used. Your Gateway
®
satellite speaker will
accommodate both the “Omnimount 10
Series” and the “Sound Gear SATP Series”
and other manufacturers’ mounts. Follow
the instructions included with the mount for
proper wall attachment.
Figure 3: Using an Aftermarket Swivel Mount
Aftermarket Speaker
Mounting Plate
1
/
4
˝- 20 screws