Gateway 7250R - Manual (Page 20)

Completing the connections 15
Completing the connections
When the system drawer is installed in the cabinet, make the system
connections.
Connecting a single system drawer
To connect the peripherals:
1 Turn off all system drawers and devices in the cabinet before attaching
any of the system drawer cables.
2 Connect all I/O device cables (keyboard, mouse, video, serial, and
parallel) to their respective ports on the back of the system drawer.
The system board connectors may appear different than in the
illustration, depending on your system board.
Important A wide variety of system connections are possible. Your
actual system connections may be different from the
following examples.
To power
source
SCSI bus
Mouse
Keyboard
KVM or
keyboard tray
Tape storage
drawer
To printer
To monitor or KVM tray
8506163.book Page 15 Wednesday, May 10, 2000 11:40 AM