Graco Inc. UNICARB Pro AA4500 - Manual (Page 41)

308936 41
Technical Data
Category Data
Gun Weight 35 oz (1 kg)
Gun Length 11.4 in (290 mm)
Maximum Air
Working Pressure 100 psi (7 bar, 0.7 MPa)
Maximum Fluid
Working Pressure 3000 psi (207 bar,
20.7 MPa)
Typical Noise Level
at 40 psi (2.8 bar,
0.28 MPa)* Sound Pressure { 86 Db(A)
Sound Power } 88.9 Db(A)
Maximum Noise
Level at 100 psi
(7 bar, 0.7 MPa)** Sound Pressure
{ 95 Db(A)
Sound Power
} 99.7 Db(A)
Voltage Output 0–85 kV
Short Circuit Current
Output 120 mA
Paint Resistivity
Range 3 megohm-cm to infinity
Air Inlet 1/4 npsm(m) left-hand
Fluid Inlet 1/4 npsm(m)
Wetted Parts Stainless Steel, Nylon, PEEK,
Ultra High Molecular Weight
Polyethylene, Tungsten
Carbide, Glass Filled Nylon
r Viton r is a registered trademark of the DuPont Co.
Loctite r is a registered trademark of the Loctite Corporation.
* Noise levels measured with a 40 psi (2.8 bar) air supply at
the gun air inlet and typical gun air flow settings.
** Noise levels measured with a 100 psi (7 bar) air supply at
the gun air inlet and maximum gun air flow settings.
{ Sound pressure was measured per Cagi Pneurop, 1969.
} Sound power was measured per ISO–3744, 1981.
Radio Frequency Transmitter Approval
for Gun Part No. 236031 and 236033
FCC ID: JHI1
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1.) This device may not cause harmful interference,
and
2.) This device must accept any interference received,
including interference that may cause undesired
operation.
Changes or modification to this equipment, not
expressly approved by the party responsible for com-
pliance, could void the user’s authority to operate this
equipment.
This equipment complies with (DOC) GRR II 6. (4)
En conformite avec (MDC) RGR II 6. (4).