GoVideo R6750 - Manual (Page 26)

26
DVD Recorder User’s Guide
Surround Sound
Sets your preferred surround sound
format when watching DVD movies.
1
Press SETUP.
2
Select Audio > Surround
3
Choose from the following:
Stereo – Select if you prefer to hear
the stereo soundtrack on DVD movies
(if available).
Dolby - Select if you prefer to hear
the Dolby Digital 5.1 soundtrack on
DVD movies (if available).
DTS - Select if you prefer to hear the
DTS 5.1 soundtrack on DVD movies (if
available).
Audio Settings
Digital Out
Sets the format of the digital audio signal
from the rear panel Optical and Coaxial
jacks.
1
Press SETUP.
2
Select Audio > Digital Out.
3
Choose from the following:
PCM – Select if the DVD Recorder is
connected to a 2-channel (stereo)
digital amplifier.
Bit Stream - Select if the DVD Re-
corder is connected to a 5.1 channel
amplifier/receiver with a Dolby Digital
decoder.
DTS Out
Enables the DVD Recorder to output a
DTS (Digital Theater Sound) signal to an
external receiver with a DTS decoder.
1
Press SETUP.
2
Select Audio > DTS Out
3
Turn DTS Out on or off.
S
ETUP
S
ETUP
Playback
Language
Record
Audio
DTS Out
Exit
System
TV Tuner
Digital Out Bit Stream
Off
Surround DOLBY
SETUP
ENTER
����������
���������������
���
• If you are not using the digital audio outputs (Optical or
Coaxial), you do not need to adjust these settings.