GM GPS Receiver - Manual (Page 95)

Black plate (95,1) Cadillac SRX Navigation System - 2011
Infotainment System 95
Making a Call
Calls can be made using the following commands.
Command Usage
Dial or Call The dial or call command can be used
interchangeably to dial a phone number or
a stored name tag.
Digit Dial This command allows a phone number to
be dialed by entering the digits one at
a time.
Re‐dial This command is used to dial the last
number used on the cell phone.
Using the “Dial” or “Call”
Command
1. Press b g . For vehicles with a
navigation system, say “Hands
Free”, after the tone.
2. Say “Dial” or “Call”.
3. Say the entire number without
pausing or say the name tag.
Once connected, the person called
will be heard through the audio
speakers.
Using the “Digit Dial” Command
The digit dial command allows a
phone number to be dialed by
entering the digits one at a time.
After each digit is entered, the
system repeats back the digit it
heard followed by a tone.
If an unwanted number is
recognized by the system, say
“Clear” at any time to clear the last
number.
To hear all of the numbers
recognized by the system, say
“Verify” at any time.
1. Press
b g
. For vehicles with
a navigation system, say “Hands
Free”, after the tone.
2. Say “Digit Dial”.
3. Say each digit, one at a time,
that you want to dial. After each
digit is entered, the system
repeats back the digit it heard
followed by a tone. After the
last digit has been entered,
say “Dial”.
Once connected, the person called
will be heard through the audio
speakers.