Grizzly H7582 - Manual (Page 12)

-10-
Model H7582 Junior Electric Guitar Kit
Components Needed Qty
Guitar Neck ....................................................... 1
Guitar Body ....................................................... 1
Neckplate ........................................................... 1
Silver Screws #7 x 1
3 ⁄
4
" ..................................... 4
The neck is pre-finished and is ready to install.
To attach the neck to the guitar body:
1. Place the neck into the neck pocket (Figure
9). If the neck does not fit into the pocket,
lightly sand the high points on the neck until
it fits.
2. Place the neckplate over the neck pocket
holes and thread four #7 x 1 3 ⁄
4
" silver screws
( Figure 10) through the guitar into the neck.
DO NOT use glue, since you may want to
remove the neck for maintenance and tune-
ups.
Figure 9. Neck installation.
Neck
Figure 10. Neckplate installation.