List of models, Symbols, Warning – Graco Inc. 237-296 User Manual

Page 2: Caution

Advertising
background image

2

308-425

List of Models

Part No. Series Pump Model

Ratio

Maximum Fluid

Working Pressure

Maximum Air

Input Pressure

236–477 B

Kingt

56:1

5000 psi (345 bar. 34.5 MPa)

90 psi (6 bar, 0.6 MPa)

237–296 B

Kingt, with hose and gun

56:1

5000 psi (345 bar. 34.5 MPa)

90 psi (6 bar, 0.6 MPa)

237–281 B

Kingt, with surge tank

56:1

5000 psi (345 bar. 34.5 MPa)

90 psi (6 bar, 0.6 MPa)

237–285 B

Reduced Icing Quiet

Kingt

56:1

5000 psi (345 bar. 34.5 MPa)

90 psi (6 bar, 0.6 MPa)

238–906 B

Reduced Icing Quiet

Kingt, with hose and gun

56:1

5000 psi (345 bar. 34.5 MPa)

90 psi (6 bar, 0.6 MPa)

Symbols

Warning Symbol

WARNING

This symbol alerts you to the possibility of serious

injury or death if you do not follow the instructions.

Caution Symbol

CAUTION

This symbol alerts you to the possibility of damage to

or destruction of equipment if you do not follow the

instructions.

WARNING

INSTRUCTIONS

EQUIPMENT MISUSE HAZARD

Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.

D This equipment is for professional use only.

D Read all instruction manuals, tags, and labels before operating the equipment.

D Use the equipment only for its intended purpose. If you are not sure, call your Graco distributor.

D Do not alter or modify this equipment.

D Check equipment daily. Repair or replace worn or damaged parts immediately.

D Do not exceed the maximum working pressure of the lowest rated system component. Refer to the

Technical Data on page 18 for the maximum working pressure of this equipment.

D Use fluids and solvents which are compatible with the equipment wetted parts. Refer to the

Tech-

nical Data section of all equipment manuals. Read the fluid and solvent manufacturer’s warnings.

D Do not use hoses to pull equipment.

D Route hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose

Graco hoses to temperatures above 180_F (82_C) or below –40_F (–40_C).

D Wear hearing protection when operating this equipment.

D Do not lift pressurized equipment.

D Comply with all applicable local, state, and national fire, electrical, and safety regulations.

Advertising