Gateway GTW-P46M103 User Manual
User's guide
Advertising
Table of contents
Document Outline
- Introducing YourGateway PlasmaTV
- Connecting Components
- Warning
- Understanding video connections
- Connecting your DVD player
- Using component video (AV2)
- To connect your DVD player using component video:
- 1 Connect the green-colored Y jack on the back of your DVD player to the greenAV2 jack on the ba...
- 2 Connect the blue-colored PB or CB jack on the back of your DVD player to the blueAV2 jack on t...
- 3 Connect the red-colored PR or CR jack on the back of your DVD player to the redAV2 jack on the...
- 4 Connect the red (R) and white (L) audio jacks on the back of your DVD player to the RAV2 and L...
- 5 Select the AV2 input using the Input button on the front of your plasmaTV.
- 1 Connect the green-colored Y jack on the back of your DVD player to the greenAV2 jack on the ba...
- To connect your DVD player using component video:
- Using S-Video (AV1)
- Using composite video (AV1)
- Using component video (AV2)
- Connecting your HDTV decoder set-top box
- Using component video (AV2)
- To connect your HDTV decoder set-top box using component video:
- 1 Connect the green Y jack on the back of your HDTV set-top box to the greenAV2 jack on the back...
- 2 Connect the blue PB or CB jack on the back of your HDTV set-top box to the blueAV2 jack on the...
- 3 Connect the red PR or CR jack on the back of your HDTV set-top box to the redAV2 jack on the b...
- 4 Connect the red (R) and white (L) audio jacks on the back of your HDTV set-top box to the RAV2...
- 5 Select the AV2 input using the Input button on the front of your plasmaTV.
- 1 Connect the green Y jack on the back of your HDTV set-top box to the greenAV2 jack on the back...
- To connect your HDTV decoder set-top box using component video:
- Using RGB video
- Using component video (AV2)
- Connecting your VCR or video camera
- Connecting off-airTV or cableTV
- Connecting a computer
- Adjusting Your PlasmaTV Settings
- Maintenance and Troubleshooting
- Cleaning and maintenance
- Troubleshooting
- You cannot see a picture
- You see a distorted picture or hear unusual sound
- The color is abnormal
- The picture has abnormal patterns
- The display image does not cover the entire screen
- You can see a picture but you cannot hear sound
- The monitor has pixels that are always dark
- An image remains on the screen even after you turn off your plasmaTV
- You see “noise” or “trash” on the screen
- Screen brightness is diminished
- Telephone support
- Safety, Regulatory, and Legal Information
- Index