GarrettCom FT14 User Manual
Page 42
FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/09)
33
www GarrettCom com
.
.
3.6 Connecting Ethernet Media
Connecting Ethernet media to the Magnum FT14 Series Media Converter is
very simple and straightforward. Using proper media segment, simply attach the cable
end to the appropriate connector.
See Sections 4.4 for details of the LEDs on the media converter models.
3.6.1
Connecting Twisted Pair (RJ-45 ports)
The following procedure describes how to connect a 10BASE-T twisted pair
segment to the RJ-45 port on the Magnum Media Converters. The procedure is the same
for both unshielded and shielded twisted pair segments.
1.
Using standard 10BASE-T media, insert either end of the cable with an RJ-45
plug into the RJ-45 connector of the Magnum Media Converter.