Good Way Tech USB to Parallel Bi-Directional Cable AP1305 - Manual

3F, No.135, Lane 235 Pau Chiao Rd., Hsin Tien, Taipei County, Taiwan
Tel: 886-2-8919-1200
Fax: 886-2-8919-1220~1
http://www.goodway.com.tw
E-mail:[email protected]
The USB to Parallel Bi-Directional Cable allows your PC to print to most parallel printer device connected through the USB port. Just plug the
USB connector of the cable into the USB port of your PC and the other end into the Centronics connector of the parallel printer. The device's
USB (Universal Serial Bus) interface provides up to 12Mbps data throughput, so printing is much faster compared when connected to standard
parallel port (150kbs). The USB-to-Parallel cable also provides true plug-and-play and hot-plug capability – simply plug in the cable under the
Windows operating system and the cable will be instantly detected.
Specifications
Features
Single chip (ASIC) USB to Parallel communication
Windows 98SE Driver Support
Universal Serial Bus Specification Rev. 1.1 compliant
USB full speed communication and bus powered
USB Printer Class Specification 1.0 compliant
IEEE-1284 36 pin male with Ferrite core
IEEE-1284 1994 (Bi-directional parallel interface)
specification compliant
Cable length: 2 meters
PC Interface USB 1.1 compliant A type male connector
Parallel Connector IEEE 1284 bi-directional DB36 male connector
Specification Support z USB Printer Class Specification 1.0
compliant
z IEEE-1284 1994 (bi-directional parallel
interface) specification compliant
Buffer Size z Unified 512-byte buffer
z Dynamically allocated for upstream and
downstream data flow
Regulations CE, FCC
Input Pins Voltage Level 5V tolerant
Printer
Computer
Compatibale with USB-enabled
Desktop PC or Notebook
Application
Intel-compatible 486DX-66 MHz CPU or higher
One Standard USB Port
Windows 98SE, ME, 2000 or XP
USB to Parallel Bi-Directional Cable
Driver Installation CD
Quick Installation Guide
System Requirements
Package Content