Grizzly T10050 User Manual
Instructions
Inventory (Figure 2)
A. Bender (not shown) .................................... 1
B. Bender Handle ........................................... 1
C. Work Stop Rod ........................................... 1
D. Hex Bolts M10-1.5 x 40 (Handle) ............... 2
E. Flat Washers 10mm (Handle) .................... 2
F. Work Stop ................................................... 1
G. Work Stop Knob ......................................... 1
H. Hex Nut M12-1.75 (Work Stop Rod) .......... 1
Specifications
Maximum Workpiece Thickness ........ 3 Ga.(
15
⁄
64
")
Maximum Workpiece Width .............................. 4"
Machine Weight .........................................81 lbs.
MODEL T10050
RIGHT ANGLE
IRON BENDER
INSTRUCTIONS
Figure 1.
Model T10050.
Damage to your eyes, face, and hands could
result from using this item without proper
protective gear, such as safety glasses or a
face shield, and gloves.
Copy RiGHT © July, 2008 By G Rizzly iNdu STRial, iNC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#JB10791 pRiNTed i N CHiNa
Figure 2.
inventory.
If you need help with your new machine, call our
Tech Support at: (570) 546-9663.
B
C
d
e
F
G
H