Grandstream Networks GXP Series - Manual (Page 5)

Grandstream Networks, Inc. GXP User Manual Page 5 of 40
Firmware 1.1.6.16 Last Updated: 05/2008
Installation
E QUIPMENT P ACKAGING
Table 1: Equipment Packaging
GXP-280 GXP-1200 GXP-2000 GXP-2010 GXP-2020
Main Case Yes Yes Yes Yes Yes
Handset Yes Yes Yes Yes Yes
Phone Cord Yes Yes Yes Yes Yes
Power Adaptor Yes Yes Yes Yes Yes
Ethernet Cable Yes Yes Yes Yes Yes
High Phone Stand No Yes No Yes Yes
Low Phone Stand Yes No No Yes Yes
Wall Mount Spacers (2) No Yes No Yes Yes
C ONNECTING Y OUR P HONE
The connectors of the GXP1200/2010/2020 are located on the bottom of the device while they are
located on the back side of the GXP280/2000.
Table 2: GXP Connectors
EXT
Connects the GXP Extension unit directly to the GXP using connection cable.
Draws power from PoE if provided by network.
PC
10/100Mbps RJ-45 ports for PC (downlink) connection.
LAN
10/100Mbps RJ-45 port for LAN (uplink) connection. Supports PoE (802.3af).
Draws power from either spare line or signal line.
Power Jack
5V DC power port; UL Certified
Headset Jack
RJ22 and 2.5mm for GXP-280/2010/2020
RJ22 for GXP-1200
2.5mm for GXP-2000 HW Rev1.0 or later
Handset Jack RJ11
GXP-2000 E XTENSION U NIT
GXP–2000 supports two (2) extension units, providing up to 112 additional programmable extensions.
Each GXP Extension unit has 56 multi–purpose keys, dual color LEDs (red/green) and support BLF (Busy
Lamp Field) and Presence.
GXP–2000 Extension package contains: