Grundig AMIRA32HDBLK - Manual (Page 15)

Note: The Zoom mode does not operate while
there is a PIP picture in the screen and in the
COMP/HDMI/PC inputs. The Zoom mode is
aborted once the program has been switched,
Teletext is entered or PIP is activated.
Timer: Your television deploys the feature of
being able to be turned off at the end of a period
of time that you detected and to be turned on
again after a time you designated. To ensure
that your television turn off at the end of your
desired time period, select the timer tab. Select
your desired period of time with the numerical
buttons. Determine the time for turning on in the
same way. Enter in the program no. tab the
channel from which you would like the TV to be
turned on. At the end of the time you specified,
your television will automatically switch to stand-
by. It switches to the selected program at the
end of that time while the TV is on.
ZOOM: To activate this option, press the button
( ) on your remote control while
watching a program picture. During the
zooming process, the image is zoomed
out in three stages in a centre-oriented
way. To move up/down
( )/( ) or
right/left ( )/( ) on the picture in this
position, press the ( ) button on your
remote control. Then, press the key for
the direction in which you would like to
move. In the event that you wish to exit
the Zoom mode for any reason, simply
press the
( ) button. By pressing the
( ) button, you may return to the normal
mode after the three stages.
OK/
FREEZE
ZOOM
MENU
TIMER
0-9
BACK MENU
CLOCK
ON TIME
OFF TIME
PROGRAM NO
13:47
- - : --
- - : --
P 01
Menu language: Selecting the Menu
language tab, press the right movement
( ) button. The menu languages shall
appear in the menu in order, select your
desired language using the Right-left
movement buttons
( )/( ) . Press the ( )
button. All the setting displays of your
television will be visualized in the
language that you selected.
Child lock : If this feature is turned On,
the program that is found is locked, the
image and sound is off, the locked
program is skipped while zapping
programs with the ( )/( ) buttons.
OK/
FREEZE
FREEZE: You may freeze the program picture
you are watching thanks to this feature.
For this purpose, press the
( ) button
on your remote control while there are
no menus on the screen. The program
picture will freeze until the same button
is pressed for the second time.
Note: The Freeze feature also freezes PIP
screen while there is a PIP picture on the screen.
Using the PIP (Picture in Picture) feature;
Press the ( ) button on your remote
control. The PIP screen appears on the
screen. According to the selected source,
a window will be opened inside the main
picture and a sub-screen will be
displayed.
You can return to PAP mode by pressing the
button
( ) again. You can return to the normal
mode by pressing the ( ) button in the PAP
mode.
To change the source on the PIP screen in the
PIP or PAP mode, you may use the up/down
( )/( ) direction buttons.
Note1: All the sources can be selected in the
PIP while there is TV or AV on the screen.
However, only TV/AV can be watched while there
is COMP/HDMI/PC on the main screen.
Note2: The PIP source information available in
the TV/AV mode and the PIP source information
available in the COMP/HDMI/PC mode are the
same. Hence, the PIP source also changes once
the main screen has been switched from TV/AV
to COMP/HDMI/PC.
PIP Position:
With this option, you can change the
position in which the PIP window is
visualized on the screen. For this
purpose, you may change the PIP
Position by pressing the Right/Left
direction ( )/( ) buttons after pressing
the button while there is a PIP picture on
the screen.
PIP SEL.
OK/
FREEZE
PIP POS.
-15-