Grizzly Hi-Lift Hydraulic Cart T10041 - Manual

The Model T10041 Hi-Lift Hydraulic Cart ( Figure
1) will move and raise material weighing up to 330
lbs. to a maximum working height of 53
1 ⁄
4
" above
the floor.
The Model T10041 was carefully packed when
it left our warehouse. If you discover this Hi-Lift
Hydraulic Cart is damaged after you have signed
for delivery, please immediately call Customer
Service at (570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, you should inventory the
contents.
Inventory (Figure 2)
A. Cart (Not Shown) ....................................... 1
B. Handle ........................................................ 1
C. Foot Pedal .................................................. 1
D. Hex Bolts M8-1.25 x 40 (Handle) ............... 2
E. Hex Bolt M8-1.25 x 20 (Foot Pedal) .......... 1
This table cart is not a toy. DO NOT allow
children to use this cart. Serious injury may
occur if this cart is used incorrectly.
COPYRIGHT © OCTOBER, 2007 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#JB10054 PRINTED IN CHINA
MODEL T10041
HI-LIFT
HYDRAULIC CART
INSTRUCTION SHEET
Figure 2. Inventory.
Figure 1. Hi-Lift Hydraulic Cart.
B
E
C
D
This table cart is not designed to support
people or to be used as a lift for working
beneath. Serious injury may occur if this cart
is used incorrectly.
Introduction