MRV Communications EM316SW-XY - Manual (Page 22)

Fiber Driver
®
EM316SW-XY
PN 1288003-001, Rev D2
14
Switch Block 2* (SW2)
DIP Switch DIP Switch Name
Setting
Bold = Defaults
Description
ON (up) P1 Forced 100Base-T if ANEG is off
1 FAST
OFF (down) P1 Forced 10Base-TX if ANEG is off
ON (up) P1 Forced Full-Duplex if ANEG is off or failed
2 FULL
OFF (down) P1 Forced Half-Duplex if ANEG is off or failed
ON (up) P1 Auto MDI is enabled
3 AMDI
OFF (down) P1 Auto MDI is disabled if ANEG is off
On (up) P2 loopback is enabled
4 LPBK
OFF (down) P2 loopback is disabled
ON (up) P4 Forced 100Base-T if ANEG2 is off
5 FAST2
OFF (down) P4 Forced 10Base-TX if ANEG2 is off
ON (up) P4 Forced Full-Duplex if ANEG2 is off or failed
6 FULL2
OFF (down) P4 Forced Half-Duplex if ANEG2 is off or failed
ON (up) P4 Auto MDI is enabled
7 AMDI2
OFF (down) P4 Auto MDI is disabled if ANEG2 is off
ON (up) P3 loopback is enabled
8 LPBK2
OFF (down) P3 loopback is disabled
* Shaded and bold describe factory default settings