Motorola ME4251 - Manual (Page 19)

18
U
si
n
g
th
e
Te
le
p
h
o
n
e
During a call:
1. Press the
key. The handset speaker comes on.
2.
3. Press the key to end the call.
Taking calls
When an external call is received, all registered handsets ring and the LCD backlight
comes on for 15 seconds after call is picked up by the handset.
The display shows Incoming call. The green incoming call light on the base flashes.
Note: If you have subscribed to caller ID, the caller's name or number will be shown
(if available from the network).
Handset is in the base station/charger (auto-answer):
If auto-answer is set to on, the line will be automatically connected when you lift the
handset from the base/charger.
1. Lift the handset to answer the call.
Note: If auto-answer is set to off, lift the handset and press the
key or the key
to answer the call.
Handset is not in the base station/charger:
1. Press the
key or the key to answer the call.
Prefix Dialling
When prefix dialling is set to ON, the prefix number that you set will be dialled out
first whenever you make an external call. The prefix can be a number up to 5 digits.
You can use the prefix memory to store an area code that you frequently use, for
example 0207 or 08457, to save you dialling it each time you make a call.
BD1217 ME4251 user guide [4] 18/7/05 Page 18
Place the handset back in the base station/charger unit. The call will disconnect
and go back to standby status.