Multiquip Concrete Saw SP-6457 TD - Manual (Page 30)

30
Handlebars
The handlebars are adjustable to three different angles, for optimum operator
control, and can also be slid fully inward for storage. Once handlebars are
adjusted, lock them into position by tightening the lock knob on each side.
Fig. 12 — Handlebar Positions
Using the handlebars in position #2 or #3 when employing larger diameter
blades, reduces the need to bend over, and reduces the effort required by the
operator to maneuver the saw.
Three
operating
positions
Storage
position
Lock Knob
P3
P2
P1