Minolta 2330 - Manual (Page 47)

47
BURST IMAGE CAPTURE
Determine the image composition
while looking into LCD monitor or
viewfinder and adjust the image
range and size with the
or key.
• When the key is pressed, the image size
becomes large (Telephoto mode).
• When the key is pressed, the image
range becomes wide (Wide-angle mode).
6
Press the shutter-release button part-
way down. 7
Press and hold the shutter-release
button all-the-way down.
• When your finger is lifted from the shutter-
release button or the maximum number of
picture is taken, the sequence shot is
completed.
• When taking burst images, the focus and
exposure adjustments are determined when
the shutter-release button is pressed part-
way down and these adjustments are
applied to all images in the sequence shot
mode.
• Even after taking a sequence shot, the
sequence shot mode capture is not
cancelled. The single shot mode returns
when the camera is turned off and on
again.
8