Analog codes – Mercedes-Benz CS1000 User Manual
Page 68
1
ANALOG CODES
CS1000 Code Scanner
OB15-11
68
%!# %
%!# %
%!# %
%!# %
Models
Model Years
129.061 129.066 129.067 129.076
1990-12/93
Connect wires of Scanner as follows (Model 129.061/066)
Scanner
Data Link Connector 16-pin
Yellow
Socket 7
Black
Socket 1
Red
Socket 16
Connect wires of Scanner as follows (Model 129.067/076, all 129 from 1993)
Scanner
Data Link Connector 38-pin
Yellow
Socket 22
Black
Socket 1
Red
Socket 3
FAULT CODE TABLE
DTC Readout
Possible Cause of Failure
1
No faults found
2
Roll bar control module
3
Volts supply
4
Driver seat belt lock relay open circuit or short circuit to Battery + or ground (-).
5
Passenger seat belt lock relay open circuit or short circuit to Battery + or ground (-).
6
Roll bar deployment solenoid, open circuit or short circuit to Battery + or ground (-).
7
Left and/or right axle switch, roll bar, short circuit to 30 or 31
8
Roll bar warning lamp
9
SRS warning lamp and/or code scanner button held to erase faulty
10
SRS control unit