Mio A501 - Manual (Page 30)

1-14
Getting Started
1.6
Using Your Device in a Vehicle
Using the Car Holder
Your car holder consists of a bracket and an arm stand. Follow this procedure
to mount the device in a car:
1. Assemble the bracket and the
arm stand.
2. Clean the windshield where you
will apply the suction cup.
3. Attach the suction cup to the
windshield and push in the
locking tab to secure the suction
cup.
4. Carefully fit the device into the bracket.
5. Turn the rotate wheel at the top of the arm stand clockwise to loosen
it. Adjust the device to the best viewing angle, and then turn the rotate
wheel counterclockwise to fasten it.
When the device is placed in the bracket, you can push the Volume control
on the bracket to adjust the volume.