M-S Cash Drawer A794 - Manual (Page 68)

A794 Owner’s Guide Chapter 6: Programming Information
December 1999 63
Initialize Printer
ASCII ESC @
Hexadecimal 1B 40
Decimal 27 64
Default: Character Pitch: 15.6 CPI
Column Width: 44 characters
Extra Dot Rows: 3
Character Set: Code Page 437
Printing Position: Column One
Clears the print line buffer and resets the printer to the default settings for the startup
configuration (refer to Default settings below).
Single-Wide, Single-High, Non-Rotated, and Left-Aligned characters are set and User-
defined characters or logo graphics are cleared. (Flash Memory is not affected.) Tabs
reset to default. Receipt selection state is selected.
Exceptions
In printers with the Parallel interface, this command also returns paper exhaust to the
paper status line if an alternate status has been requested.