Getting started, Caution – Monessen Hearth CSVF30SPV User Manual

Page 7

Advertising
background image

58D56002

7

GETTING STARTED

MAKE SURE YOU HAVE RECEIVED ALL PARTS:

Carefully inspect the contents for shipping damage. If any parts are missing or damaged, immediately inform the dealer

from whom you purchased the appliance. Do not attempt to install any part of the appliance unless you have all parts

in good condition.

WHAT YOU WILL NEED FOR INSTALLATION:

You must have the following items available before proceeding with installation:

Gloves are recommended when handling ceramic fiber logs to prevent skin irritation
from loose fibers. Logs are fragile--handle with care.

CAUTION

Check your packing list to verify that all listed parts have been received. You should have the following:
• Cast Iron Stove with Burner Assembly
• Installation/Operating Instructions
• Ceramic Fiber Logs
• Touch-up Paint
Millivolt controlled heater designed to be operated with optional devices for ON/OFF functions.
• Hand-Held Remote with Receiver, Manual or Thermostat
• Wall Switch with 15' Wire
• Wall T-stat with 15' Wire
• Stove Mounted Thermostat Control

• External regulator (for propane/L.P.G.)

or high pressure natural gas (1 to 2 PSI system)

• Pipe sealant approved for use with propane/L.P.G.

(Resistant to sulfur compounds)

• Piping which complies with local codes

• Manual shutoff valve

• Sediment trap (recommended)

• Tee joint

• Pipe wrench or appropriate wrench set

• Screwdrivers

Advertising
This manual is related to the following products: