MITSUBISHI ELECTRIC WD-65000 - Manual (Page 53)

53
Part IV : Operation
Remote Control Functions: Operation of PIP and POP
Changing PIP/POP Inputs
Press PIP INPUT to cycle through avail-
able inputs. To see which inputs can and
cannot be used together, see How Con-
nections
Affect the PIP and POP -Table
1, page 14.
Changing PIP/POP Channels
Press PIP CH to scroll up and down
through memorized channels on Ant-A,
and Ant-B.
Exchanging Program Images
Press ENTER/EXCH to exchange the main
picture and the PIP/POP picture.
Moving PIP Image
Press ADJUST
{
,
}
,
$
, or
%
to move
the PIP display anywhere on the main
screen.
Automatic POP Switching
When automatic POP switching is active,
the TV will cycle through memorized
channels or strobe pictures from other A/
V components in the POP display. Press
PAUSE to activate/pause automatic POP
switching.
Freeze the PIP and Side-By-Side
Picture
Press PAUSE to freeze the PIP and side-
by-side images. When you press PAUSE
while viewing normal picture, PIP image
will appear and be frozen. Press Pause
again to go back to a “live” image.
PIP/POP Audio Signal
For PIP/POP audio connection illustra-
tion, see
Back Panel Functions - 2 , page
13. Volume for the PIP AUDIO OUTPUT
is controlled by the amplifier or wireless
headphones.
MAIN
PICTURE
Side-by-Side
MAIN
PICTURE
POP 1
POP 2
POP 3
MAIN
PICTURE
POP 1 POP 2 POP 3
POP 4 POP 5 POP 6
POP 7 POP 8 POP 9
PIP A 017 Ant-A 002 KCBS
480I Standard
TV-PG DLSV
SQV-1
PIP A 017 Ant-A 002 KCBS
480I Standard
TV-PG DLSV
SQV-1
5
Operation of PIP and POP
4
3
2
1