Shutter speed settings – Mamiya 645 PRO TL User Manual

Page 23

Advertising
background image

Shutter Speed Settings

3. Wind up. How to set the Shutter Speed Dial
Wind up the crank handle until it 1. Set the desired shutter speed

stops. In

the

film counter window, the against the white index line (A) on the

number 1 appears, and the film and shutter speed dial.
shutter are set. 2. At the red “A" (for Automatic) and

AEL (for Automatic Lock) settings,
the shutter speed dial is locked

between these two positions. These

settings will only function if an AE

Finder is mounted on the camera. To
release this lock push button (B) while

turning dial.
3. All while numbers are fractional

seconds. (i.e. 30 =1/30 sec).

The yellow 2 and 4 are full seconds.

“B” (shutter stays open as long as it
is depressed) is also yellow.

4. Red 60 is 1/60 sec. It is colored red
to remind you that it is the fastest

speed useable with electronic flash.
5. Note: When a Metz Electronic Flash

Unit, together with SCA 396 module,
is attached to the camera, the camera

sets itself automatically to 1/60 sec.,

irrespective of the dial setting.

When manually selected shutter

speeds are set on the shutter speed
dial, the intermediate shutter
speeds available in the AE

operation are not obtainable.

Advertising