Meridian America DSP5000 - Manual (Page 36)

Customising using Config 36
DSP5000 User Guide
have the DSP5000 ignore the Standby state of the associated
preamplifier, looking after its own Standby independently. To select this
mode while in the system menu:
1. Press Fn - Record
The display should indicate 'preamplifier off' like this:
?? P.
Toggle this choice with Fn - Record.
Setting the Volume mode
1. Press the menu
e e
key
LE. 1
In the 500 Comms system there is provision for two volume controls, main
and secondary.
2. Use the and menu keys to choose between:
•
1. Volume main means that the DSP5000 volume control will follow
the main system and respond to the red keys on the remote.
Shifted (secondary) volume commands will be passed on to
another product.
•
2. Volume secondary means that the internal volume control will
follow the second volume control in the system and respond to the
shifted volume command on the remote.
•
3. Volume is handled in the speaker independently of other
products on the Comms.
Options 2 and 3 are for Multiroom installations. If in doubt select 1.
Surround system options
Balance control operation
Installations including the Meridian 565 Digital Surround Processor
normally release the system balance function to 565.
1. Press the menu
e e
key
The display should indicate the balance control status:
bAL. y
Toggle this choice with the and menu keys.
Choose ‘n’ if you have a 565, ‘y’ otherwise.
DSP Centre channel exists?
This choice tells the master that a Meridian DSP Centre speaker will be in
use as a centre-channel on the system.
1. Press the menu
e e
key
The display should indicate the centre status:
CEn. y
Toggle this choice with the and menu keys.
Choose ‘y’ if you are using a DSP speaker with centre-channel features
as a centre.
Source menus
The source menus are used to change what happens when you press a
key on the MSR (i.e. what the DSP5000 then displays, and which input it
selects).