Motorola EQ7 - Manual (Page 7)

English
6
Connect wirelessly to 2 devices (multipoint connection)
To connect to phone and music device at the same time:
1. Pair and connect to your phone first (see section “Connect Wirelessly).
2. Turn off your phone and your speaker system.
3. Turn your speaker system back on. The Bluetooth indicator flashes to indicate the speaker system is in
discoverable mode.
4. Turn on your music device. Make sure the Bluetooth feature is turned on in the device.
The music device searches for your speaker system.
5. Complete steps 5 & 6 on section “Connect Wirelessly” to pair and connect your music device and speaker
system successfully.
6. Turn off your speaker system.
7. Turn your phone back on and make sure the Bluetooth feature is turned on in both the phone and music
device.
8. Turn your speaker system back on. It should now connect to both devices.
Connect with a cable
To listen to your music using a wired connection, connect your music device to the Audio port on your speaker
system using the included audio cable.
See figure 4 on page 2
Notes:
UÊ / iК
Х`ˆœК«œÀÌÊv՘VМˆœ˜ГК>ÃÊ>˜Кˆ˜«ХМК«œÀÌÊvÀœ“Ê>К“ХГˆVК`iЫˆViКœ˜ЮК­˜œМК>ÃÊ>Ê i>`« œ˜iʍ>VŽ®°
UК К*>ÞL>VŽКVœ˜МАœГК«АœЫˆ`i`Кœ˜КЮœХАКГ«i>ŽiÀÊÃÞÃÌi“ÊV>˜˜œÌÊLiÊÕÃi`ÊÜ i˜ÊˆГМi˜ˆ˜}КМœК“ХГˆVКˆ˜«ÕÌÊvÀœ“Ê܈Аi`К
connection.
UК ˜КЬˆАi`КVœ˜˜iVМˆœ˜]КˆvʘœК>Х`ˆœКˆГК i>А`КМХА˜КХ«КЫœХ“iКœ˜К“ХГˆVК`iЫˆVi°