McCulloch 6096-200317 - Manual (Page 2)

2 3
PLEASE READ
Dear Customer,
Thank you for purchasing a McCulloch product. With proper operation and maintenance, it will provide you with years of serv-
ice.
In order to make the best use of your investment, be CERTAIN to familiarize yourself with the contents of the ENTIRE user
manual before attempting to operate and maintain your unit.
Be sure to carefully follow the step-by-step instructions in this manual to start, operate and maintain your new product.
In the manual there will be the following call-outs: NOTE:, WARNING / CAUTION and WARRANTY.
A NOTE: is used to convey additional information, to highlight a particular explanation, or to expand a step description.
A WARNING or CAUTION identifies a procedure which, if not undertaken or if improperly done, can result in serious person-
al injury and/or damage to the unit.
The (WARRANTY SYMBOL) serves notice that unless instructions or procedures are followed, any damage caused will
void the warranty and repairs will be at owner’s expense.
Pay particular attention to the safety precautions. They are written for your protection and contain important information you
must know to safely operate your shredder.
FOR WARRANTY OR SERVICE CONTACT THE NEAREST McCULLOCH AUTHORIZED SERVICE CENTER - LOCATE
YOUR NEAREST SERVICE CENTER BY CALLING THE TOLL FREE NUMBER IN THIS MANUAL.
INTRODUCTION 1 - GENERAL INFORMATION
Hopper
SPECIFICATIONS
Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120V~, 60Hz, 15 Amp
No Load Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3300 RPM
Hopper Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14.4”x9.4”x7.5”
Max. Cutting dia. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-5/8” (40mm)
Wheel Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6” (154m)
Net Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48.5 Lbs. (22 Kg)
ON-OFF
Switch
Overload
Protection Switch
Discharge chute
access knobs
Hopper Safety
Screws
Wheel (R)
Leg (R)
Leg (L)
Wheel (L)
Axle
Discharge
Chute
Wrench
Wheel
Spacers (2)*
Wheel Caps (2)*
Wheel
Nuts (2)*
Leg Bolts (4)*
Safety Set
Screws (4)*
Leg Nuts
(4)*
Flat Washers
(2)*
Leg Saddle Washers
(4)*