Motorola Phone i500plus - Manual (Page 46)

40
i500plus User’s Guide
Desktop Dual-Pocket Charger
The NTN1690 Desktop Dual-Pocket Charger charges Motorola
authorized batteries, as listed on page 37, for the i500plus.
Figure 3. Desktop Dual-Pocket Charger
Charging a battery:
1. Insert the power supply’s DC jack plug into the DC jack receptacle
on the back of the Charger. Use only with the Motorola rapid
charger included with your Desktop Charger package.
2. Plug the power supply end of the power-supply cord into any
standard AC outlet. The Charger performs a quick power-up
self-test during which both LED indicators flash green once to
indicate a successful power-up.
3. Attach a battery to your i500plus phone. Place the i500plus onto
the pin connector located in the charger’s front pocket.
N O T E : The Desktop Dual-Pocket Charger should only be
powered by the included Rapid Power Supply. The
Charger will flash both LEDs red if the Standard
Travel Charger is attached.
Data cable receptacle (DC jack)
MAEPF-26698-O MAEPF-26726-O
Rear pocket
Front pocket
Pin connector
LED indicators
Power supply cord receptacle