Multiquip High Cycle Generator GDP-5H - Manual (Page 19)

GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 19
When the switch is in the 240 volt (down) position, you can
acess
half of the rated power of the generating set at 120
volts from the GFCI duplex receptacle and up to half of the
rated power of the set at 120 volts from 120V twist-lock
receptacle; or full rated power of the set at 240 volts from
the 240V twist-lock receptacle.
12. Full Power Switch – The generator is provided with a full
power switch. Figures 4C and 4D show simplified wiring
diagrams of the dual voltage system.
When the full power switch is in the 120 volt (up) position,
you can access the
full rated power of the generator at
120 volts from the GFCI duplex receptacle and the120V
twist-lock receptacle, or a combination of both receptacles
as long as the total load does not exceed the generating
set capacity.
Figure 4D. 120/240V Full Power Switch
Simplified Diagram (Down Position) Figure 4C. 120V Full Power Switch
Simplified Diagram (Up Position)
Figure 4B. Generator Components
GDP-5H — CONTROLS AND INDICATORS
When the full power switch is in the
120V position, the 240V twist-lock
receptacle
cannot be used.
NOTE