Motorola CP040 - Manual (Page 9)

7 English
GE
TTING
STAR
TE
D
GETTING STARTED
BATTERY INFORMATION
Charging Your Battery
If a battery is new, or its charge level is very low, you
will need to charge it before you can use it. When
the battery level is low and the radio is in transmit
mode you will see the LED indicator flash red. Upon
release of the PTT button, you will hear an alert
tone.
Note: Batteries are shipped uncharged from the
factory. Always charge a new battery 14 to 16
hours before initial use, regardless of the
status indicated by the charger.
Desktop Charger
To Charge the Battery
a Remove and replace the battery in the charger.
If the LED indicator continues to flash red,
consult your dealer.
b A standard battery may require 90 minutes to
charge to 90% capacity.
1 Turn the radio off.
2 Place the battery, with or without the radio, in
the charger pocket.
• The charger LED indicates the charging
progress.
LED color Status
No LED Indication Battery inserted incorrectly
or battery not detected.
Single Green Flash Successful charger
power-up.
Flashing Red
a
Battery unchargeable or not
making proper contact.
Red Battery is charging.
Flashing Yellow Battery in charger but
waiting to be charged. The
battery temperature may be
too hot or too cold. The
voltage may be lower than
the predetermined threshold
level for charging.
Flashing Green b Battery 90% (or more)
charged.
Green Battery fully charged.
CP040_EN.fm Page 7 Thursday, October 2, 2003 10:53 AM