Marathon OXYMITH TRANSMITTER F200060 - Manual (Page 22)

Page 19 of 23
11/14/2006 Rev. 14
Thermocouple Null
Thermocouple Span
Cold Junction Trim
Communications port RS-485 Half Duplex Only
Protocol Modbus RTU
Baud rates 1200, 2400, 4800, 9600, 19.2K (19.2K default)
Parity None
Address 1 – 254 (Address 1 is default)
Housing
Material Polyamide PA non-reinforced
Inflammability Evaluation Class V0 (UL94)
Temperature Range -40 to 100°C
Dielectric Strength 600 kV/cm (IEC243-1)
Mounting Snaps on to EN 50022 top hat (T) style DIN rail.
Terminals
Wire clamp screw terminals on four position removable terminal blocks.
Wire Size
AWG 24 – 12 flexible stranded, removable terminal blocks.
Max. Torque 0.8 Nm
CAUTION: DO NOT CONNECT OR DISCONNECT HOUSING PLUGS
WHILE MODULE IS POWERED OR UNDER LOAD.
Weight 10 oz
Environmental Conditions
Operating Temperature -20 °C to 55 °C (-4 to 130 F)
Storage Temperature -40 °C to 85 °C (-40 to 185 F)
Operating and Storage Humidity
85% max relative humidity, noncondensing, from –20
to 65°C
Certifications and Compliance (PENDING)
Safety EN 61010-1, IEC 1010-1
Safety requirement for electrical equipment for measurement, control, and
laboratory use, Part 1
Electromagnetic Compatibility
Immunity as specified by EN 50082-2
Electrostatic discharge EN 61000-4-2 Level 3: 8 kV air
Electromagnetic RF fields EN 61000-403 Level 3: 10 V/m
80 MHz – 1 GHz