Marantz RC9200 - Manual (Page 5)

User Guide
3
Introduction
Tap the Mode Button:
to access the Mode
Menus. They are
different based on the
type of panel you last
displayed. Use the
Mode Menus to
customize your remote.
Devices Macros Home
Tap the Scroll Arrows:
to scroll to other panels within the
active group.
Tap the Macro menu Bar:
to use your one touch
Macro buttons. Tap again
and a menu of all of your
Macro groups appears.
Tap again to select:
Tap the Device
menu bar:
to operate devices.
Tap again and a
menu of all your
devices appears.
Tap again to select:
Panel number:
shows active
control panel
Tap the Scroll Arrows:
to scroll to other
panels within the
active group.
2. The Battery
When you use the Remote Control for the first time, you will have
to:
• install the battery pack;
• place the Remote Control in the docking station and charge the
Remote Control.
• tap the INFO button on the Home Panel to check battery
life.
Warning Use the docking station only with the Philips NiMH rechargeable
battery pack.
We strongly advise you not to plug other appliances (like mobile
phones, PDA’s, …) into the docking station. This will damage both
the connector and the appliance.
Use the Control Panel
Buttons:
to operate your
components